| ROBOSTER |
| |
Steam
Sterilizer |
|
 Field
of application
This device has been designed to satisfy the needs of all CSSDs
and Operating Theatres, as well as Laboratories.
Its technology has been specially studied to make this machine extremely
reliable, long lasting, economical and easy to use and maintain.
|
| Sterilization
volumes |
| |
Total Volume |
Useful Volume |
| Single door
ref APR 10000 |
300 Litres |
250 Litres |
| Double door
ref APR 10001 |
300 Litres |
250 Litres |
|
| |
| Technology |
| This
sterilizer ROBOSTER
is available in single or double door version. The door(s) is hinged
and tightened by central screw pushing on a lever. Air tightness is
obtained by compressing a solid silicon gasket The material of the
door is solid 316 L stainless steel, the opening has a diameter of
45Omm. The sterilization chamber is also made of solid 316 L stainless
steel with a diameter of 620 mm and a depth of 1000mm, stamped at
3 bars for pressure. The monitoring of the cycle is operated by microprocessor
unit, which permanently controls the effectiveness of each phase of
the cycle. The security system is also constantly checked during the
cycle for a proper functioning of the sterilizer. The choice of the
cycle can be done by pushing a single key on the command panel, according
to the type of load; sterilization time and temperature can be adjusted
on the same command panel. Temperature is adjustable from 1000C to
1380C, the temperature is measured by a PT 100 (probe). |
| Steam
generator |
 ROBOSTER
is equipped with an independent steam generator with 23 litre capacity
and 18 Kw electrical power; and automatic regulation of water level.
It is connected to the water tank of the sterilizer by a booster pump,
allowing a complete disconnection between the steam circuit of the
sterilizer and the main water supply of the building. |
| Vacuum |
| In
order to ensure the durability of the device, it is equipped with
a static condenser to perform high vacuum to obtain an efficient elimination
of air and a good drying at the end of the cycle. |
| Programmable
standard cycles: |
| BOWIE-DICK
TEST CYCLE |
LINEN
& INSTRUMENT CYCLE |
 |
 |
| Liquid
Cycle (optional OPR 10036) |
| For the
laboratory activity, for the sterilisation of liquids tapped or untapped,
it is necessary to have a PT 100 (probe) placed inside a container
of the liquid to be sterilized, in order to control the temperature
of this liquid during the cycle and permit the opening of the door
only if the temperature of the media is below 95°C (in conformity
with European standard EN 61010-2-041). |
| LIQUID
CYCLE |
 |
| Cycles
recording (optional ref OPR 10008) |
|
 Roboster
can be fitted with a 2-line recorder, for pressure and temperature,
on continuous 100 mm wide tape, running speed 180mm/Hour, giving
the complete history of the cycle.
|
| Complementary
equipments |
| The loading
of the chamber can be done manually or using a rolling trolley -ref
CHA 10006 - in which case it is preferable to use also the transfer
tray -ref TRA 10000 for single door and TRA 10001 for double door
- to slide the baskets inside the chamber. In case the water main
drain is located above the ground - within the limit of 200mm-, the
machine must be placed on a ground base frame ref EMIS 10006 for used
water draining by gravity |
| Accessories |
BASKETS
The load can be put in different types of baskets
|
 |
| COI 10010 |
500/300/300mm |
| COI 10009 |
500/300/150mm |
| COI 10008 |
500/300/100mm |
|
For
the sterilization, the feeding bottles can be put straight into the
baskets or better into special baskets with separated 8 squares -
Ref PBG 10000 - or 12 separated squares - ref PBG 10001. |
| Structural
frame and covering panels |
The
outside panels are covered with Stelvetite, they can be totally dismantled
on all sides. The whole device is mounted on a 316 L stainless steel
chassis. There is an option for brushed-polished 316 L stainless steel
panels - Ref OPH 10005 for single door and OPR 10006 for double doors.
With a ground basefrarne - ref EMB 10006-, for uniformity of the stainless
steel aspect it is necessary to add the option ref OPR 10034.
|
| Roboster |
APR
10000 |
APR
10001 |
| Overall dimensions: |
|
|
| Width |
790mm |
790mm |
| Height |
1300mm |
1300mm |
| Depth |
1500mm |
1730mm |
| Net weight |
350kg |
420kg |
| Water weight |
650kg |
720kg |
| Electrical supply |
220 V TRI +T ou 380 V+T
22KW
|
| Voltage |
| Power |
|
| |
| |
Bottles
125cc without teat |
Bottles
250cc without teat |
Bottles
125cc with teat |
Bottles 250cc with teat
|
| Stackable baskets |
| 8 squares ref PBG 10000 |
24 baskets |
12 baskets |
24 baskets |
12 baskets |
| |
192 bottles |
96 bottles |
192 bottles |
96 bottles |
| Stackable baskets |
| 12 square ref. PBG 10001 |
16 baskets |
8 baskets |
16 baskets |
8 baskets |
| |
192 bottles |
96 bottles |
192 bottles |
96 bottles |
|
|
|
|
|
